Contact us   Home   繁體   簡中  
System / Module Reliability Engineering Test
Material Test for Automotive
Climatic Environmental Test
Dynamic Environmental Test
Industries/Outdoor Environmental Test
Mechanical Stress Test
Design Verification
Lead Free Qualification
Component Reliability Test
Board Level Reliability Test
Other Test


Highly Accelerated Life Test-HALT/HASA/HASS
Accelerated Stress/ Life Test (AST/ALT) started back in the 1960s in America when space projects were demanding higher reliability standards. As times past and high technology has become more and more advanced, due to the quickly changing market, the old ways of verifications were too slow and new test methods were demanded to meet the needs of the changing market caused by product competition. Therefore, a key problem with all national and international companies was to find a fast and efficient way of detecting flaws during the designing stage. This is why HALT and HASS became important.

It is universally known that it is easier if a flaw or weak link is rectified during a developmental stage. If the product is already in mass production, any problems will be harder to fix. In this marginal profit age, if a product shows signs of malfunction or failures during the warranty period, the cost of damages and lose of reputation are incalculable. In the 1990s, large American international companies (including Hp, Dell, Cisco, Nortel, Tetronix, Motorola) all used HALT testing for newly developed products to quickly find any potential defects or weaknesses in the design or production as well as make modifications to lower costs during warranty, increase product reliability, and shorten product launch.

In addition, findings from HALT testing can be used for failure mode and information for continuing development. Currently, high technology industries such as aerospace electronics, automobile electronics, and information technology all perform HALT testing and received effective results.

Highly Accelerated Life Testing (HALT)
Highly Accelerated Life Testing uses a step stressing technique to accelerate the life of the product. Stressing includes: vibration, high/ low temperature, rapid temperature cycling, combined stress, on/ off cycling, voltage limits and frequency limits.

Highly Accelerated Stress Audit/ Screening (HASA/HASS )
According to statistics from America's General Electric company, 33% of failures of a new product is due to design defects; 34% is due to unsuitable component selection; and 33% is due to production flaws. Honeywell's investigation on mature products entering the market showed that 60% of the failures is due to bad quality components and 40% due to production flaws. Therefore, better production control on components and manufacturing process can effectively control RMA percentage.

Generally, when a product shows failure in the field, usually there are already hundreds or thousands of that production line out on the market. Therefore, taking advantage of the results from HALT testing during the designing stage will increase product standards and by inducing the results into HASA/ HASS testing will bring quality control on mass production.

Benefits of HALT/ HASS/ HASA
   Potential flaws and defects of the product will emerge and can be modified during the design stage.
   For mass production screening, HASS and HASA can be used for creating product specifications and standards.
   HALT/ HASS/ HASA can be used to reduce failures on the market and decrease repair costs.
   The results are stored in development database and can be used for reference in future development to save cost and time.

Machine Specifications
   Temperature:-100℃ to +200℃
   Temperature change rate:>50℃/minutes
   Axes excited:3 Linear, 3 Rotational
   Vibration frequency range: 2 Hz To 10 KHz
   Vibration level:Up to 50 GRMS
   Inside dimension: 136(W)*137(D)*91&139(H)/cm
   Vibration table : 122(W)*122(D)/cm

HALT Equipment
This service is belonged to DEKRA iST, please contact below window for any enquiries:
Please contact nearest location for inquiries :
Taiwan China ─ Kunshan Shenzhen Wuhan Chengdu
Other services you may be interested in:
PCBA/ System Level Reliability Test
Damage Boundary Curve (D.B.C) Test
Reliability Demonstration(MTBF)
Highly Accelerated Stress Analysis(HASS)

Lab Service:    Taiwan      |       China      |        USA       |       Japan     |       TWN ITS     |       Partnerships
Designed by CREATOP