Contact us   Home   繁體   簡中  
 
 
 
 
 
 
System / Module Reliability Engineering Test
Material Test for Automotive
Climatic Environmental Test
Dynamic Environmental Test
Industries/Outdoor Environmental Test
Mechanical Stress Test
Design Verification
Lead Free Qualification
Component Reliability Test
Board Level Reliability Test
Other Test
 
 
 



Salt Spray Test
 
Salt Spray Test
The Salt Spray Test is normally used to verify coating quality on surface of materials and simulate product application in the salty atmosphere in island countries or on marine vessels. According to USA military specifications.

Applications of Salt Spray Test are as follows:

The Salt Spray Test should evaluate the quality of protective coatings.
The test cannot replace the humidity and mold effects; therefore, the results cannot evaluate the environment.
The Salt Spray Test is usually conducted after climatic testing to better identify the flaws on the coating.

IEC standard in comparison to MIL standards, besides the purity of the salt in the MIL standard is a little different, the temperature and salt concentration is practically the same. From experience, alternating humidity and salt spray cycling is better at inspecting flaws and faults and verifying the coating quality than a fixed temperature and Salt Spray Test.

Salt Spray Test
 
 
 
Salt spray、Coating Quality、salt mist
許先生/Elton
+886-3-5795766#7322
web_SRE@dekra-ist.com
Please contact nearest location for inquiries :
USA Taiwan ─ Hsinchu China ─ Shanghai Kunshan Beijing Shenzhen Japan
Other services you may be interested in:
 
Scanning Electron Microscope (SEM)
Corrosion Test
European Telecommunications Reliability Test
Auger Electron Spectroscopy(AES)
 


 
Lab Service:    Taiwan      |       China      |        USA       |       Japan     |       TWN ITS     |       Partnerships
Designed by CREATOP